next up previous contents
Next: Alignment Up: User's Guide Software Previous: Stimulate Main Window

File Load/Save

 

Stimulate allows for loading and saving four types of images:

Typically, the Anat images have high tissue contrast and high spatial resolution. The Anat and Stim images must be of the same orientation and have the same planar field of view. However, the Anat slice spacing can differ from that of the Stim as long as the slices are contiguous.gif The current software version requires that the images have dimensions that are a power of two and that they have a centered field of view.

A subset of widgets on the Main Window (3-1) are used for file input/output as shown in Figure 4 with their corresponding pulldown menus shown in Figure 5. After a selection is made from one of the menus in Figure 5, a file browser will popup (See Section  5).

The ``Roi'' menu item under the button (5-2), will save a description of the current ROIs (See Section 11). The ``Roi'' menu item under the button (5-1) allows for subsequent retrieving of the ROIs. Note that when retrieving ROIs, the current ROIs will not be automatically cleared. If the the current ROIs have been cleared prior to loading a new set of ROIs, the file name will appear in the field (11-6).

The ``Grid'' menu item under the button (5-2), will save the Talairach grid (See Section 16), as a ROI for subsequent loading as a ROI. This is useful for inclusion of the Talairach grid in a TIFF file (See Section 18.1).

   figure202
Figure 4: Main Window file input/output widgets.

   figure207
Figure 5: File input/output menus.


next up previous contents
Next: Alignment Up: User's Guide Software Previous: Stimulate Main Window